中文 |

Newsroom

High Resilience and Low Hysteresis Versatile Porous Flexible Sensor Prepared by Photocurable 3D Printed Ionogel

May 06, 2022

Flexible sensors are widely used in health diagnosis, motion monitoring, and human-computer interaction due to their excellent tensile properties, electrical conductivity and fit.  

However, due to the inherent viscoelasticity of soft materials, the flexible sensor cannot quickly recover to its original shape during dynamic loading, resulting in a large hysteresis in the signal of the flexible sensor, which seriously affects the monitoring accuracy of the flexible sensor. How to quickly and accurately fabricate flexible sensors with low hysteresis remains a challenge. 

In a study published in Chem. Eng. J., the research group led by Prof. WU Lixin from Fujian Institute of Research on the Structure of Matter (FJIRSM) of the Chinese Academy of Sciences, developed high resilience, low hysteresis and versatile porous flexible sensor by photocurable 3D printed ionogel. 

Based on hydrogen bond-rich acrylate monomers and ionic liquids, the researchers prepared a photosensitive resin with fast polymerization rate for digital light processing (DLP) printing of porous ionogel flexible sensors (PIFS), and a deformable Alan Schoen's I-wrapped package (IWP) lattice was introduced in PIFS to improve the resilience of the flexible sensor. 

The experimental results showed that after 500 cyclic compressions with a strain of 70%, the residual strain of the lattice-structured PIFS is almost 0, and the hysteresis loops are almost overlapped, showing that the PIFS has excellent resilience and fatigue resistance. High elasticity and durability enable PIFS to have low hysteresis (2.4%), providing reliable sensing signals during long-term cyclic loading. The introduction of lattice structure also makes PIFS have higher pressure sensitivity (0.45 kPa-1).  

The researchers also took advantage of the freely designable structure of 3D printing technology to design and print PIFS with customized structures for monitoring pulse, finger, gait and wrist movements. 

In addition, PIFS has a low glass transition temperature (-45.8 °C) and can work stably in a low temperature environment. It also has antibacterial properties and rapid response to temperature changes, which can monitor temperature changes, demonstrating that PIFS is a versatile flexible sensor. 

This study solves the hysteresis problem of flexible sensors by designing lattice structures in the sensor using 3D printing technology. 

Contact

WU Lixin

Fujian Institute of Research on the Structure of Matter

E-mail:

Tailoring of photocurable ionogel toward high resilience and low hysteresis 3D printed versatile porous flexible sensor

Related Articles
Contact Us
  • 86-10-68597521 (day)

    86-10-68597289 (night)

  • 86-10-68511095 (day)

    86-10-68512458 (night)

  • cas_en@cas.cn

  • 52 Sanlihe Rd., Xicheng District,

    Beijing, China (100864)

Copyright © 2002 - Chinese Academy of Sciences